
Tecno Spark 6 Go Ke5K Flash File Stock firmware needs then you have come to the right place. This Device has CPU MediaTek MT6765 and Stock ROM scattering format, this firmware is useful if you have brick performance, lag, or shuttering performance and die, you have the latest version of Tecno Flash Tool trying to install this file Complete all software and your virus problems today gave You are here full installation guide for free.
- 1 Tecno Spark 6 Go KE5K Full Specifications:
- 2 What is Stock ROM
- 3 Why Need Firmware Tecno Spark 6 Go KE5K Flash File
- 4 Tecno KG6K Firmware Information
- 5 Download Tecno Spark 6 Go KE5K Firmware
- 6 Pre-Requirements For Flashing
- 7 How to Flash Tecno Spark 6 Go KE5K
- 8 How To Bypass FRP Lock Tecno Spark 6 Go KE5K
- 9 How to Flash This Device Using Tecno Transsion Flash Tool
- 10 How To Backup Your Important Data?
- 11 Note :
- 12 Instructions to Install:
Tecno Spark 6 Go KE5K Full Specifications:
SPECS | Tecno Spark 6 Go |
---|---|
Display | 6.52-inch HD+ IPS LCD |
OS | Android 10 (Go Edition) with HiOS 6.2 |
Chipset | MediaTek Helio A20 |
RAM | 2 GB and 4GB |
Camera | 8 MP Selfie and 13MP Back Camera’s |
STORAGE | 32 GB/ 64 GB |
USB OTG | Yes |
BIOMETRICS | Fingerprint Sensor |
BATTERY | 5000 mAh Li-ion Battery (Non-removable) |
COLORS | Aqua Blue, Ice Jadeite, and Mystic White |
What is Stock ROM
Stock ROM is running your Android device operating system. The body of your device has this firmware, if you have a hard brick problem after the blinking of your Tecno Spark 6 Go KE5K Flash File device is the most common problem, don’t worry just install this firmware on your device all your problems, the most device gets hard brick because of the carelessness of some users,
Why Need Firmware Tecno Spark 6 Go KE5K Flash File
It’s always recommended that you back up your device’s firmware after buying it. You will need your device’s stock ROM for the following reasons someday
Downgrade or increase your device:
You can use the Tecno Spark 6 Go KE5K Flash File Firmware to lower the version or improve your device to a new version. It depends on the release of the stock firmware or your choice if the option is available
Unbrick:
Tecno Spark 6 Go KE5K stock ROM firmware can also be used to cancel any device. Smartphones can be recorded when trying to direct them or flash ROM or special recovery
Unroot:
You can also use Tecno Spark 6 Go KE5K Flash File stock firmware to make your device unroot completely. After flashing the official stock firmware, you will get your warranty back.
Fixing problems:
Your device may develop problems that might be related to software; You can fix it by flashing the Tecno Spark 6 Go KE5K Flash File Firmware.
Tecno KG6K Firmware Information
Rom Name | Tecno Spark 6 Go KE5K |
Based On | Stock OS |
Rom OS Version | Android 10 |
Rom Type | Odexed |
Socs | MediaTek |
Software needed | Sp Flash Tool |
Compress | Zip format |
Download Tecno Spark 6 Go KE5K Firmware
- Tecno_Spark_6_Go_KE5K_MT6765_V185_210508
- Tecno_Spark_6_Go_KE5K_MT6765_V169_210129
- KE5k-H6122CD-Q-OP-211122V210
- SP Tool = LINK
- Tecno Tool = LINK
Pre-Requirements For Flashing
- Devices supported: Tecno Spark 6 Go KE5K
- Be sure to charge your device more than 50%
- You need a PC or laptop with a USB cable
- Download the complete backup of your Android phone
- Download Drivers and Tools:
How to Flash Tecno Spark 6 Go KE5K
- Find the name of your model Tecno Spark 6 Go KE5K
- Check your Android version now running
- Check your Android phone model/processor model such as MTK, SPD, QC, etc.,
- Download the USB driver by the CPU from your mobile.
- Download the same model currently running the firmware/flash / ROM file from firmware kabalkhajaliya.com
- Download the Flash Tool by the CPU / processor model such as the SPFlash Tool for MediaTek, SPD Tool for Spreadtrum, and QC Tool for Qualcomm Processor.
- Download the file unzip or extract it quickly by WinRAR or ZIP on your computer
- Open your compatible version of your mobile version
- Place your cellular recovery mode or flash mode by vol + and resist volumes and press the power button
- Connect with a PC with a USB cable
- Select your flash file model that is the same as downloaded from firmware kabalkhajaliya.com
- Click to start flashing your mobile.
How To Bypass FRP Lock Tecno Spark 6 Go KE5K
- Open the sp flash tool and select the scatter file from the given flash file.
- Click on the above format
- After that click on manual format flash
- Open the file named scatter in the firmware folder and search for FRP by pressing control + F
- Copy the “Begin address” and “format Length” and paste them into the manual option
- (Ex: Begin address 0x2d88000 and Format Length 0x100000)
- After that click on the Start Play button and connect the phone to your computer.
How to Flash This Device Using Tecno Transsion Flash Tool
- 1. Download and Extract Tecno Flash Tool from here
- 2. Launch SWD_AFTERSALES Instructed Folders
- 3. Click the Settings icon
- 4. Click the Load button
- 5. Select the scatter file in the Stock ROM folder device you want to flash
- 6. Select the firmware upgrade or format + Download from the drop-down menu.
- 7. Click the confirm button.
- 8. Now turn it off and connect your device to your PC.
- 9. Wait for the flashing process to finish.
- 10. Reboot the Device.
How To Backup Your Important Data?
Initially connect your mobile device with a PC or laptop OK. Now you can choose MTP [media transfer protocol]. And then copy your device information and save it on a PC or laptop. For more details click here
Note :
please back up your data before upgrading to Android. If you want to downgrade your device’s software version to Android Lower Version by an official software package, it may cause erase all data from your device be sure to backup your important data before Updating!
Instructions to Install:
We are on kabalkhajaliya.com and will not be liable for any damage/error that may occur to your phone while following this tutorial. Proceed at your own risk