Here, you can download The Tecno Camon 20 Pro 5G firmware file, which has been verified to work properly. Tecno Camon 20 Pro 5G CK8n Flash File can be used to reinstall the operating system (OS) on your mobile device.
The stock ROM is provided in a zip file that includes a flash tool, a USB driver, and an installation guide. Stock ROM helps to fix software problem, boot loops, battery drain issues, or updating/downgrading the mobile OS.
Tecno Camon 20 Pro 5G specification
Tecno Camon 20 Pro 5G comes with a 120 Hz refresh rate 6.67-inch touchscreen display. Tecno Camon 20 Pro 5G is powered by a MediaTek Dimensity 8050 processor. and runs HiOS 13.0 based on Android 13. The Tecno Camon 20 has a 5000mAh non-removable battery and supports 33W Fast Charging.
The Tecno Camon 20 Pro 5G comes with a 64-megapixel, a 2-megapixel, and a 2-megapixel camera. It has a 32-megapixel single front camera setup for selfies. It comes with 8GB RAM,128GB, and 256GB of inbuilt storage. The Tecno Camon 20 Pro 5G is launched in Dark Welkin and Serenity Blue colors. Tecno Camon 20 Pro includes Wi-Fi, GPS, Bluetooth, USB Type-C, 3G, 4G, and 5G, ambient light sensor, compass/ magnetometer, and in-display fingerprint sensor.
Download Tecno Camon 20 Pro 5G CK8n Flash File:
- CK8n-H931A-T- RU -V 1038: Download
- CK8n-H931ABC-T- GL -V 1243: Download
- CK8n-H931ABC-T-GL-230328V519: Download
- CK8n -H931A-T- RU -230815V 1391: Download
All Flash Tool:
All USB Drivers:
Why Need Tecno Camon 20 Pro 5G Firmware
- This fixes the boot problem and the problem of instability too.
- To increase or lower your Tecno Camon 20 Pro 5G Firmware version
- You can Remove the screen lock and malware too
- To fix lags on your Android device.
- You can delete the root on your device [Unroot]
- You can restore the stock ROM after using a custom ROM.
- You can fix a soft brick problem on your Tecno Camon 20 Pro 5G
- Flash File helps solve problems with WiFi, Bluetooth, and more.
How to Flash Tecno Camon 20 Pro 5G CK8n Firmware:
- First, you need to download and install the SP Flash Tool on your computer
- Download and install MTK Android USB drivers on your PC
- Then download the Firmware File from the link above
- Turn off the phone, release the battery (if released) Re-enter the battery, and connect the USB cable to the charger socket
- Now open the sp flash tool.exe
- Open the Download button on the Flash SP tool on the Download tab,
- Click the Scatter Loading button and select a scatter File,
- Now Click the Download button
- Now connect your smartphone to a USB cable and press the up or down button for easy detection
- Now flashing is complete, the green ring will appear on the SP Flash tool Close the SP Flash Tool on your computer and unplug the phone
- Turn on your cellphone and enjoy
Disclaimer
you are on kabalkhajaliya.com and we will not be liable for any damage/error that may occur to your phone while following this tutorial. Proceed at your own risk.
