Realme Narzo 50i RMX3231 Flash File Firmware

Realme Narzo 50i RMX3231 Flash File
Realme Narzo 50i RMX3231 Flash File

Realme Narzo 50i RMX3231 Flash File can be used to repair the Hang logo and delete all keys on the screen. This file will delete all the screen lock forms after flashes, such as patterns and FRP. For Checked u r flash file ver Click on an emergency and dial with a code call * # 899 #.

Download the file below with the direct download link and read all flashing instructions before flashing your mobile. If you run a flash tool on your PC, you will be asked to enter because the device needs an incoming credential. If you don’t have to contact me on the Facebook page or give me a letter. Paid operations are provided.

Realme Narzo 50i RMX3231 Full Specifications:

Realm Narzo 50i Mobile was launched on September 24, 2021. This phone is equipped with a 6.50-inch touchscreen display with a resolution of 720×1600 pixels. Appears with 2GB of RAM. Realm Narzo 50i runs Android 11 and is powered by a 5000mAh battery.

Realm Narzo 50i Runs RealMe UI GO Edition is based on Android 11 and the default 32GB package that can be expanded via a microSD card (up to 256GB) with a special slot. Realm Narzo 50i is a dual-SIM cellphone. Realm Narzo 50i measuring 165.20 x 76.40 x 8.90mm (thickness of width x width x) and weighs 195.00 grams. It was launched in mint green and black carbon.

What is stock ROM

Stock Rom runs the operating system of your Android device. Your device’s device is this firmware, if you have a hard brick problem after Blinking a Realme Narzo 50i RMX3231 you are the most common problem, don’t worry enough to install this firmware on your device all your problems, the hardest brick device because of the carelessness of some users,

Why Need Realme Narzo 50i RMX3231 Flash File

  • If your device dies, you can break yourself using a stock ROM file
  • You can repair or repair IMEI on your device using DB files from Stock Rom
  • Remove Malware or Adware from Realme Narzo 50i
  • You can fix the boot loop problem on realme Narzo 50i
  • Unfortunately, the application has stopped the error in Realm Narzo 50i
  • Fix network-related problems
  • Patch Boot Image for Root Using Magisk: MediaTek Guide or Spreadtrum Guide
  • You can open Unroot RealMe Narzo 50i
  • To reset or delete FRP on your device: MEDIATEK FRP Guide or FRP Guide Spreadtrum
  • Restore realm Narzo 50i back to the factory country

Download Realme Narzo 50i RMX3231 Firmware

Software DetailsDownload Link
Download Link
  • MSM Flash Tool = LINK
  • Realme Mtk DRIVER = LINK
  • SP Flash Tool = LINK

Pre-Requirements: For Flashing

  1. Devices supported: Realme Narzo 50i
  2. Be sure to charge your device more than 50%
  3. You need a PC or laptop with a USB cable
  4. Download the complete backup of your Android phone
  5. Download Drivers and Tools:

How to Flash Realme Narzo 50i RMX3231

  1. Download the firmware & extract
  2. Out of the icon appearing, Double click on Download Tool
  3. After the tool launches on your pc, click on Start All
  4. Switch off your mobile and connect it to pc by pressing the volume up and down button
  5. It will lead you to successful flashing.

How To Backup Your Important Data?

Initially connect your mobile device with a PC or laptop OK. Now you can choose MTP [media transfer protocol]. And then copy your device information and save it on a PC or laptop. For more details click here

Note :

please back up your data before upgrading to Android. If you want to downgrade your device’s software version to Android Lower Version by an official software package, it may cause erase all data from your device be sure to backup your important data before the Update!


Please enter your comment!
Please enter your name here