IQOO Neo 6 PD2199F Flash File Firmware Stock Rom Free

IQOO Neo 6 PD2199F Flash File Firmware Free
WhatsApp Channel Join Now
Telegram Channel Join Now

The IQOO Neo 6 PD2199F Flash File Flas is now available, you can download it below. if you Want to flash the Stock file on your IQOO Neo 6 PD2199F, then you are in the right place. By using this firmware, you can solve all software problems in your Smartphone such as the Hang-On Logo, FRP lock, Fastboot mode, Black or white display after flash, dead recovery after flash, etc. With this Firmware, you can solve WiFi, and Bluetooth problems, and also fix software-related problems

To Flash the Firmware file on your IQOO Neo 6, we use a tool because this device is powered by the Qualcomm Snapdragon chipset. We have shared all pre-requisite files to install stock ROM on your device.

IQOO Neo 6 PD2199F Full Specifications:

Iqoo Neo 6 Mobile Launched on April 13, 2022. This phone is equipped with a 6.62 inch 120 Hz touchscreen display that offers a resolution of 1080×2400 pixels (FHD+) and aspects of 20: 9. Iqoo Neo 6 is powered by a Qualcomm Snapdragon 8 Gen processor Octa-core. Appears with 8GB of RAM. Iqoo Neo 6 runs Android 12 and is powered by a 4700mAh battery. Iqoo Neo 6 supports fast charging.

As far as the camera is concerned, Iqoo Neo 6 on a Triple camera setup rear package that features a 64-megapixel main camera (f/1.89); a 12-megapixel camera (f/2.2), a 2-megapixel camera (f/2.4). Rear camera settings have an automatic focus. It has a single front camera setting for selfies, displaying a 16-megapixel sensor with an f/2.0 aperture.

Iqoo Neo 6 runs Ocean Outors based on Android 12 and packs 128GB of inbuilt storage. Iqoo Neo 6 is a double-SIM mobile phone (GSM and GSM) that receives Nano-SIM and Nano-SIM cards.

What is Stock ROM

Stock ROM is running your Android device operating system. The body of your device has this firmware, if you have a hard brick problem after the Flashing, don’t worry just install this firmware on your device for all your problems, most device gets hard brick because of the carelessness of some users,

By installing stock ROM, you can solve the problem of a boot loop, a brick device. In addition, you can increase or reduce the Firmware version according to your choice

Why Need IQOO PD2199F Flash File

  • You can Fix your brick IQOO Neo 6 PD2199F
  • This fixes the boot problem and the problem of instability too.
  • To increase or lower your IQOO Neo 6 PD2199F Firmware Version
  • You can pass the screen lock and remove malware too
  • To fix bug lags on your Android device.
  • You can delete the root on your device [Unroot]
  • You can restore the ROM stock after using a custom ROM.
  • This software update helps solve problems with WiFi, Bluetooth,
  • You can fix a soft brick problem on your IQOO Neo 6 PD2199F
  • You can load Google applications too.

This flash file (official stock ROM) also helps you fix mobile devices, which face any software problem. Auto-restart on-off, free-loose FRP, hang-on logo repair, camera error repair, monkey virus, hanging when the device runs, pin lock, pattern lock, face display, privacy lock, automatic fast boot mode, automatic recovery mode. You will fix all the types of problems you face.

IQOO Neo 6 PD2199F Firmware Information

Support Phone ModelIQOO Neo 6 PD2199F
File Namezip
Rom OS VersionAndroid
Network Support5G
ProcessorSnapdragon 8
Software neededFlash Tool

Download IQOO Neo 6 PD2199F Flash File

Support ForLink
you tubeKabal Khajaliya

Pre-Requirements Flashing

  • Devices supported: IQOO Neo 6 PD2199F
  • Be sure to charge your device more than 50%
  • You need a PC or laptop with a USB cable
  • Download the complete backup of your Android phone
  • Download Driver Qualcomm and Flash Tools and USB Drivers

How To Flash IQOO Neo 6 PD2199F With Qpst Tool

  • Download IQOO Neo 6 PD2199F Flash File
  • Download QPST Tool.
  • Download And Install The Driver Qualcomm.
  • Run QPST Tool.
  • Add a new port (Check Pc Device Manager)
  • Click Load XML and Select rawprogram_unsparse.xml in the Stock ROM File.
  • Click Load Patch, then, at that point, look for patch0.xml in the Stock ROM File
  • Select the firmware Flash File in the program of search Path.
  • Click Download and Wait For the Flash File Flashing Process is complete.
  • Note: During Flashing, don’t Remove the USB Cable from the telephone, any other way the telephone can go into dead mode.


We are on and will not be liable for any damage/error that may occur to your phone while following this tutorial. Proceed at your own risk.

Read More


Please enter your comment!
Please enter your name here