POCO X4 Pro 5G Flash File Firmware Free

POCO X4 Pro 5G Flash File Firmware
POCO X4 Pro 5G Flash File Firmware

POCO X4 Pro 5G Flash File Firmware Download

Firmware helps unlock the device, update the device to the latest Android version, return the device again to stock, fix the Loop Boot problem, and many other issues on your device. We have registered the Flash Poco X4 Pro 5G file below. Download the correct stock ROM file to fix your device

The following manual is easy to install, but this guide will entirely delete data from your smartphone and all your statistics will be lost such as photos, music, videos, documents, and all stored on your smartphone. So make all the data and then continue with the following guidelines

POCO X4 Pro 5G  Full Specification:

Poco X4 Pro 5G mobile was launched on 28th February 2022. The phone comes with a 120 Hz refresh rate and 6.67-inch touchscreen display offering a resolution of 1080×2400 pixels (FHD+) and an aspect ratio of 20:9. The display sports Gorilla Glass 5 for protection. Poco X4 Pro 5G is powered by an octa-core Qualcomm Snapdragon 695 processor. It comes with 6GB of RAM. The Poco X4 Pro 5G runs Android 11 and is powered by a 5000mAh battery. The Poco X4 Pro 5G supports proprietary fast charging.

As far as the cameras are concerned, the Poco X4 Pro 5G on the rear packs a triple camera setup featuring a 64-megapixel (f/1.8) primary camera; an 8-megapixel (f/2.2) camera, and a 2-megapixel (f/2.4) camera. The rear camera setup has autofocus. It has a single front camera setup for selfies, featuring a 16-megapixel sensor with an f/2.45 aperture.

The Poco X4 Pro 5G runs MIUI 13 is based on Android 11 and packs 64GB of inbuilt storage that can be expanded via a microSD card (up to 1TBGB).

What is Flash File Firmware, Stock Rom

Sudden firmware Flash File Realme C25Y RMX3269 is an accident with a virus or hanging problem or boot loop, the logo remains the same, the problem restarts automatically then you need a flash file or Firmware stock ROM to repair your Android device. Hard reset heat works and does not enter recovery or all types of software problems then you have to install stock to your smartphone repair.

Smartphones don’t work properly without good firmware. So, the Android firmware program is part of the Life smartphone. We can remember firmware or flash files as a smartphone age. So, we need a flash file Firmware for official customer service.

Why Need POCO X4 Pro 5G Flash File Firmware

  • You can Fix your brick POCO X4 Pro 5G Flash File
  • This fixes the boot problem and problem of instability too.
  • To increase or lower your POCO X4 Pro 5G Flash File Firmware.
  • You can pass the screen lock and remove malware too
  • To fix bug lags on your Android device.
  • You can delete the root on your device [Unroot]
  • You can restore the ROM stock after using a custom ROM.
  • This software update helps solve problems with WiFi, Bluetooth, and more.
  • You can fix a soft brick problem on your POCO X4 Pro 5G Flash File Firmware
  • You can load Google applications too.

POCO X4 Pro 5G Flash File Stock Rom Firmware Information

Support Phone ModelPOCO X4 Pro 5G Flash File
File Namezip
Rom OS VersionAndroid
Network Support5G
ProcessorSnapdragon 695 processor
Software neededMI Flash Tool

Download POCO X4 Pro 5G Flash File Firmware Stock Rom

Support ForLink
you tubeKabal Khajaliya



MI Flash Tool === Link

SP Flash Tool  = Download

Pre-Requirements For POCO X4 Pro 5G Flash File Firmware

  • Devices supported POCO X4 Pro 5G Flash File Firmware
  • Be sure to charge your device more than 50%
  • You need a PC or laptop with a USB cable
  • Download the complete backup of your Android phone
  • Download Driver Qualcomm and Flash Tools and USB Drivers From kabalkhajaliya.com

How To Flash POCO X4 Pro 5G Flash File With MI Flash Tool

  • Download the POCO X4 Pro 5G Flash File and install the driver by clicking the link above.
  • Download your Xiaomi Flash Tool. USB drivers for smartphones are contained in the flash tool.
  • Extract your flash file from ZIP.
  • Extract the zip file after setting 7zip is complete.
  • Install if settings 7zip has not been installed on your PC. (7zip Links)
  • Then, run xiaomorflash.exe on your desktop and select Flash in it.
  • After you do this, select the last option in the tool and select “Image” from the “Image” folder in the folder where your Flash file is.
  • If you blink using FastBoot mode, select the “firmware” location “Firmware”.
  • After selecting the firmware after that, connect the phone to the computer.
  • To convert the phone to the EDL model, you must find it and then switch the EDL point.
  • Then attach a data cable to the phone.
  • After that, click “Clean all,” as shown below. Then click the refresh button, which will reveal the com port on the tool.
  • Then, click the flash button, and flash will then start.

How To Backup Your important Data?

Initially connect your mobile device with a PC or laptop OK. Now you can choose MTP [media transfer protocol]. And then copy your device information and save it on a PC or laptop. For more details click here

Note :

Please back up your data before upgrading to Android. If you want to downgrade your device’s software version to Android Lower Version by an official software package, it may cause erase all data from your device be sure to backup your important data before Updating!

Instructions to Install:


We’re at kabalkhajaliya.com and will not be liable for any sort of harm/mistake that happens to your handset while/after following this aide or blazing any record. Continue at your danger.

Read More

Sharing For Post:

Leave a Comment