ZTE blade A31 NFC Firmware Flash File

The Flash File Firmware is now available, you can download it below. if you Want to flash the Stock file on your ZTE blade A31 NFC, then you are in the right place. By using this firmware, you can solve all software problems in your Smartphone such as the Hang-On Logo, FRP lock, Fastboot mode, Black or white display after flash, dead recovery after flash, etc. With this Firmware, you can solve WiFi, and Bluetooth problems, and also fix software-related problems

To Flash, the Firmware file on your ZTE blade A31 NFC we use the SPD tool because this device is powered by the Unisoc SC9863A chipset. We have shared all pre-requisite files to install stock ROM on your device.

1 ZTE blade A31 NFC Full Specifications:
2 What is Stock ROM?
3 Why Need ZTE blade A31 NFC Firmware
4 Firmware Information
5 Download ZTE blade A31 NFC Firmware
6 Requirements For Flashing
7 How To ZTE blade A31 NFC With SPD Tool
8 How To Backup Your Important Data?
9 Disclaimer
10 Read More Articles

ZTE blade A31 NFC Full Specifications:

The ZTE Blade A31 smartphone was launched on July 13, 2021. The phone comes with a 5.45-inch touchscreen display with a resolution of 720 x 1440 pixels and an aspect ratio of 18:9. ZTE Blade A31 is powered by Unisoc SC9863A octa-core processor. It comes with 2 GB of RAM. The ZTE Blade A31 runs Android 11 (Go Edition) and is backed by a 3000mAh battery.

Regarding the camera, the ZTE Blade A31 has an 8-megapixel camera on the back. It has a unique front camera setup for selfies, with a 5-megapixel sensor.

ZTE Blade A31 is based on Android 11 (Go Edition) and packs 32GB of built-in storage that can be expanded via microSD card (up to 128GB). ZTE Blade A31 is a SIM mobile phone that accepts Nano-SIM and Nano-SIM cards. ZTE Blade A31 measures 140.00 x 71.00 x 8.90 mm (height x width x thickness) and weighs 166.00 grams. It was launched in blue and gray colors.

What is Stock ROM?

Stock ROM is an operating system in your device. when needs to adjust the device to a Custom ROM and other modifications then need a stock Rom. when there is something wrong during any modification, returning to the stock ROM is the only choice that can solve this problem.

By installing stock ROM, you can solve the problem of a boot loop, a brick device. In addition, you can increase or reduce the Firmware version according to your choice

Before starting the Stock ROM installation process on your mobile phone, you need to download the official Firmware file. After downloading and installing a USB driver and flash Tool on a computer., you can start the flashing process

Why Need ZTE blade A31 NFC Firmware

This fixes the boot problem and the problem of instability too.
To increase or lower your Firmware version
You can Remove the screen lock and malware too
To fix lags on your Android device.
You can delete the root on your device [Unroot]
You can restore the stock ROM after using a custom ROM.
You can fix a soft brick problem on your ZTE blade A31 NFC
Flash File helps solve problems with WiFi, Bluetooth, and more.

Firmware Information

Support Phone Model	ZTE blade A31 NFC
File Name	RU_v1.0_RP1A.201005.001
Network Support	4G
Processor	Unisoc SC9863A
Software needed	SPD Flash Tool
Passwords	No

Link Broken = Comment if Any Link Broken

Download ZTE blade A31 NFC Firmware

You Tube	Kabal Khajaliya
Flash File	Download
MSM Tool	Download

Requirements For Flashing

Be sure to charge your device more than 50%
You need a PC or laptop with a USB cable
Download the complete backup of your Android phone
Download Driver Qualcomm and Flash Tools and USB Drivers From kabalkhajaliya.com

How To ZTE blade A31 NFC With SPD Tool

Download the Latest SPD Flash Tool.
Now, please install a Spreadtrum driver updated on your cellphone. You must have the latest version of the SPD driver.
Download and install ROM stock according to the needs of your cellphone.
Run the Spreadtrum improvement tool. [.exe]
After that, connect your Lava X50M with a turn-off
After your Android device is connected,
select the PAC/PAC5 file
Now, click/select then “Start Download”
After that, follow the instructions appear and continue flashing.
Finally, your cellphone will reboot automatically takes a few minutes to reboot.
You will receive a green message.

How To Backup Your Important Data?

Please back up your data before upgrading to Android. If you want to downgrade your device’s software version to Android Lower Version by an official software package, it may cause erase all data from your device be sure to backup your important data before Updating!

Initially connect your mobile device with a PC or laptop OK. Now you can choose MTP [media transfer protocol]. And then copy your device information and save it on a PC or laptop. For more details click here

Disclaimer

We are on kabalkhajaliya.com and will not be liable for any damage/error that may occur to your phone while following this tutorial. Proceed at your own risk.