ZTE Axon 11 SE 9000N Flash File is now available, you can download it below. if you Want to flash the Stock file in your ZTE then you are in the right place. By using this firmware, you can solve all software problems such as the Hang-On Logo, FRP lock, Fastboot mode, Black or white display after flash, dead recover after flash, etc.
With this Firmware, you can solve WiFi and Bluetooth problems, and also fix software-related problems. To Flash the Firmware File on your ZTE Axon 11 we use the SP Flash Tool because this device is powered by the MediaTek MT6873 chipset. We have shared all pre-requisite files to install stock ROM on your device.
ZTE Axon 11 Full Specifications:
The phone has a curved TFT display with 6.53 inches and a resolution of 2340x1080p (FHD+). The phone has a body size of 162.7 × 76.3 × 8.8 (mm) and weighs about 184g.
On the back we have a quad camera setup, The main camera has a 48MP sensor. The other three cameras have 8MP, 2MP, and 2MP sensors, respectively. Additionally, there is a single LED flash under the camera. The front camera has a 16MP sensor. On the back, we also have a fingerprint scanner above the ZTE logo.
The phone battery of 3900mAh (built-in battery), while fast charging support is not supported. The phone also has a 3.5mm headphone jack. The phone will be available in the following storage options: 6GB, 8GB RAM + 64GB, 128GB, and 256GB storage. Also, it has three different colors which are Aurora Charm Sea, Aurora Glacier, and Aurora Fantasy Night. The phone will launch with the latest Android 10.
Pre_Requirements For Flashing
- Devices supported: ZTE Axon 11 SE 9000N
- Be sure to charge your device more than 50%
- You need a PC or laptop with a USB cable
- Download the complete backup of your Android phone
- Download Flash Tools and USB Drivers
Firmware Information
| File Name | ZTE Axon 11 SE 9000N |
| Rom Version | P683S10V1.0.0B16MR2_DL.ZIP |
| Network Support | 4G |
| Processor | MediaTek MT6873 |
| Software needed | Flash Tool |
| Passwords |
Link Broken = Comment if Any Link Broken
Download ZTE Axon 11 SE 9000N Flash File
How to install on ZTE Axon 11 SE 9000N Firmware
- First, download the firmware from the link above
- Download and install the SP Flash Tool on your computer
- Download and install MTK Android USB drivers
- Now open the sp flash tool
- Select Firmware.
- Click the Download button
- Now connect your smartphone to a USB cable and press the up or down button for easy detection
- Now flashing is complete, the green ring will appear on the SP Flash tool Close the SP Flash Tool on your computer and unplug the phone
- Turn on your cellphone and enjoy
How To Backup Your Important Data?
Please back up your data before upgrading to Android. If you want to downgrade your device’s software version to Android Lower Version by an official software package, it may erase all data from your device be sure to back up your important data before Updating!
Initially connect your mobile device with a PC or laptop OK. Now you can choose MTP [media transfer protocol]. And then copy your device information and save it on a PC or laptop. For more details click here
Read More Articles
- Xiaomi 12T Flash File
- Oppo Reno 8 4G CPH2461 Flash File
- Vivo V23E 5G PD2215F Flash File
- Redmi Note 12 Pro/Pro Plus Flash File
- Nokia C01 Plus TA-1383 Flash File
