if you are looking for a UMIDIGI A11 Flash File. If yes, then you are in the right place. Using the SP Flash tool, this guide will help you flash the Stock Firmware on UMIDIGI A11. We have shared all the pre-requisite files to install the stock ROM on your device.
using this firmware, you can solve all software problems in your Smartphone such as the Hang-On Logo, FRP lock, Fastboot mode, Black or white display after flash, dead recovery after flash, etc. With this Firmware, you can solve WiFi, and Bluetooth problems, and also fix software-related problems
Advantages of Firmware File:
Here are the answers to why you need to download and save the UMIDIGI A11 Flash File on your computer.
- If your device is dead, you can unbrick with the Stock ROM file
- You can fix or repair the IMEI on your device using Stock ROM
- Remove any malware from UMIDIGI A11
- You can fix the boot loop issue on UMIDIGI A11
- Fix Unfortunately, the app has stopped errors on UMIDIGI A11
- Fix Network related issue
- You can unroot UMIDIGI A11
- To Bypass or Remove FRP on your device
- Restore UMIDIGI A11 to Factory State
How to Flash UMIDIGI A11 Firmware File
You should download the Flash file before installing the Stock ROM on your UMIDIGI A11. Then download and install the USB Drivers and flash tool on the PC. Once you’re done with This, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware details below.
Download Flash File
- UMIDIGI_A11_4GB_V1-0_20220302.rar
- UMIDIGI_A11_3GB_E_N_V1-0_20210715.rarÂ
- Download All: Flash Tools
- Miracle Box 2.82:Â Download
- Download All: USB Drivers
Pre-Requirements:
- Supported device: UMIDIGI A11
- Make sure to charge your device more than 50%
- You need a PC or Laptop with a USB cable.
- Take a complete backup using any method
- Download VCOM drivers, SP Flash Tool, and Umidigi USB Drivers
How to Install UMIDIGI A11 Flash File:
Check your Windows system can properly identify and install the drivers of your phone in preloader mode.
Turn off your phone, open Windows Device Manager, then connect your phone to USB.
- Extract the ROM folder, which you downloaded from here.
- Extract the downloaded SP Flash Tool .rar file, then run flash_tool.exe.
- Select the Download tab, then load (choose) the MTxxxx_Android_scatter.txt file located in your ROM folder.
- Now you can choose from three different flashing modes.
- Download Only (default mode)
- Firmware Upgrade
- Format All + Download
- Let’s continue in Download Only mode to perform a system update without erasing the user data.
Uncheck the user data partition (always the last one in the list), then click on the Download button. - Now connect your powered-off (!) phone to USB without pressing any button on it.
In a few seconds, a red progress bar will appear showing that, your phone has been identified and is being booted into preloader mode. Then the flashing process gets started. A yellow progress bar will show the flashing status of each partition. - After a successful flashing, you must see the following screen with a green check mark in a window.
- Now you can disconnect and turn on your phone, the flashing process has been finished.
Note: If you have any questions, please feel free to ask in the comment section.
