Official Stock Firmware is now available for Ulefone Power Armor 18T & you can download it below. By using this firmware, you can solve all software problems such as Hang On Logo, FRP Lock, Fastboot Mode, Display Blank, White After Flash, Dead Recover, Dead After Flash, etc.
- 1 Ulefone Power Armor 18T Full Specifications:
- 2 What is Stock ROM?
- 3 Why Need Ulefone Power Armor 18T Firmware
- 4 Ulefone Power Armor 18T Flash File Information
- 5 Download Ulefone Power Armor 18T Flash File
- 6 Requirements For Ulefone Power Armor 18T Flashing
- 7 How to Flash Ulefone Power Armor 18T With SP Tool
- 8 How To Backup Your Important Data?
- 9 Disclaimer
Ulefone Power Armor 18T Full Specifications:
Power Armor 18T is the latest smartphone from Ulefone. The device comes with a Dimensity processor from MediaTek and offers a 6.58-inch screen. The screen has 1080 x 2408 pixels, a dew point, and supports a refresh rate of up to 120Hz. It’s a phone designed for extreme outdoor use, so you get IP68/IP69K and MIL-STD-810 certification. As for the hardware, the Power Armor 18T is powered by the MediaTek Dimensity 900 5G processor.
The chipset is paired with a Mali-G57 GPU and 12GB of RAM and 256GB of expandable storage. Coming to the camera department, you get three sensors on the back. These include a 108-megapixel main lens, an 8-megapixel Ultrawide, and a dedicated QVGA FLIR light sensor. There is both an IR sensor on the back, and a 6-LED flash.
What is Stock ROM?
Stock ROM is an operating system in your device. when needs to adjust the device to a Custom ROM and other modifications then need a stock Rom. when there is something wrong during any modification, returning to the stock ROM is the only choice that can solve this problem.
By installing stock ROM, you can solve the problem of a boot loop, a brick device. In addition, you can increase or reduce the Firmware version according to your choice
Before starting the Stock ROM installation process on your mobile phone, you need to download the official Firmware file. After downloading and installing a USB driver and flash Tool on a computer., you can start the flashing process
Why Need Ulefone Power Armor 18T Firmware
- This fixes the boot problem and the problem of instability too.
- To increase or lower your Firmware version
- You can Remove the screen lock and malware too
- To fix lags on your Android device.
- You can delete the root on your device [Unroot]
- You can restore the stock ROM after using a custom ROM.
- You can fix a soft brick problem on your Ulefone Power Armor 18T
- Flash File helps solve problems with WiFi, Bluetooth, and more.
Ulefone Power Armor 18T Flash File Information
|Support Phone Model||Ulefone Power Armor 18T|
|Rom OS Version||Android 11|
|Processor||MediaTek Dimensity 900 MT6877|
|Software needed||Flash Tool|
Download Ulefone Power Armor 18T Flash File
|You Tube||Kabal Khajaliya|
|SPD Flash Tool||SPD TOOL|
Link Broken = Comment if Any Link Broken
Requirements For Ulefone Power Armor 18T Flashing
- Be sure to charge your device more than 50%
- You need a PC or laptop with a USB cable
- Download the complete backup of your Android phone
- Download Driver Qualcomm and Flash Tools and USB Drivers From kabalkhajaliya.com
How to Flash Ulefone Power Armor 18T With SP Tool
- First, you need to download and install the SP Flash Tool on your computer
- Download and install MTK Android USB drivers on your PC
- Then download the Firmware File from the link above
- Turn off the phone, released the battery (if released) Re-enter the battery and connect the USB cable to the charger socket
- Now open the sp flash tool.exe
- Open the Download button on the Flash SP tool on the Download tab,
- Click the Scatter Loading button and select a scatter File,
- Now Click the Download button
- Now connect your smartphone to a USB cable and press the up or down button for easy detection
- Now flashing is complete, the green ring will appear on the SP Flash tool Close the SP Flash Tool on your computer and unplug the phone
- Turn on your cellphone and enjoy
How To Backup Your Important Data?
Please back up your data before upgrading to Android. If you want to downgrade your device’s software version to Android Lower Version by an official software package, it may cause erase all data from your device be sure to backup your important data before Updating!
Initially connect your mobile device with a PC or laptop OK. Now you can choose MTP [media transfer protocol]. And then copy your device information and save it on a PC or laptop. For more details click here
We are on kabalkhajaliya.com and will not be liable for any damage/error that may occur to your phone while following this tutorial. Proceed at your own risk.