in This Post, I will share With u Lava Z2 LMG01 Flash File. Make sure you use the correct Build version to solve the problems on your cellphone, delete the root, unlock the FRP, and Remove the Screen Lock.
Flash File also helps fix your cellphone such as solving dead problems, software problems, boot loop problems, IMEI problems, hanging on the logo and etc.
Lava Z2 LMG01 Full specification :
Lava Z2 Mobile was launched on January 7, 2021. This phone is equipped with a 6.50-inch screen and an aspect ratio of 20: 9. Lava Z2 is powered by the MediaTek Helio G35 2.3GHz processor. Appears with 2GB of RAM. Lava Z2 runs Android 10 and is powered by a 5000mAh battery.
As far as the camera is involved, Lava Z2 backpacks a 13-megapixel primary camera, and a 2-megapixel camera. This 8-megapixel camera exercise is on the front for selfies. Connectivity options in Lava Z2 include Wi-Fi and Micro-USB.
Lava Z2 is based on Android 10 and packs 32GB of inbuilt storage.
What is Stock ROM
Stock ROM runs your Android device operating system. The body of your device is this Firmware, if you have a hard brick problem after blinking from your Lava Z2 LMG01 device, you are the most common problem, don’t worry, install this firmware on your device for all your problems, most devices get bricks hard because of the carelessness of some users,
Why Need Lava Z2 Firmware
Here are the reasons you must download and save the Lava Flash File on your personal computer.
- If your device dies, you can dismantle using your stock ROM file
- You can repair your IMEI on mobile using DB files from stock ROM
- Remove any malware from Lava Z2 LMG01
- You can solve this problem with a boot loop with Lava Z2 LMG01
- Application improvement has stopped causing an error in Lava Z2 LMG01
- Fix network-related problems
- Patch Boot Image for Root Using Magazines
- You can remove Root Lava Z2
- To reset or delete FRP from your device
- Repair Lava Z2 LMG01 to the factory country
Lava LMG01 Stock Rom Information
|Support Phone Model||Lava Z2|
|Rom OS Version||Android 10|
|Processor||MediaTek Helio G35 2.3GHz|
|Software needed||SP Flash Tool|
Download Lava Z2 LMG01 Flash File
|you tube||Kabal Khajaliya|
Pre-Requirements For Lava Flashing
- Devices supported Lava
- Be sure to charge your device more than 50%
- You need a PC or laptop with a USB cable
- Download the complete backup of your Android phone
- Download All USB Drivers and Flash Tools
How To Flash Lava Z2 LMG01 With SP Flash Tool
- First, you need to download and install the SP Flash Tool on your computer
- Download and install MTK Android USB drivers on your PC
- Then download the firmware file/flash / ROM file for your cellphone from the link above
- The phone must have a power of 60% before this process
- Turn off the phone, delete the battery (if released) Re-enter the battery and connect the USB cable to the charger socket
- Now open the SP flash tool.exe when the Flash SP tool opens,
- Open the Download button on the Flash SP tool on the Download tab,
- Click the Share Upload button after finding a scatter card,
- Click the Download button
- Now connect your smartphone to a USB cable and press the up or down button for easy detection
- Now flashing is complete, the green ring will appear on the SP Flash tool Close the SP Flash Tool on your computer and unplug the phone
- Turn on your cellphone and enjoy
How To Backup Your Important Data?
Initially connect your mobile device with a PC or laptop OK. Now you can choose MTP [media transfer protocol]. And then copy your device information and save it on a PC or laptop. For more details click here
Please back up your data before upgrading to Android. If you want to downgrade your device’s software version to Android Lower Version by an official software package, it may cause erase all data from your device be sure to backup your important data before Updating!
We are on kabalkhajaliya.com and will not be liable for any damage/error that may occur to your phone while following this tutorial. Proceed at your own risk.