Cubot X30 official stock firmware File will help you flash and restore your phone to its default factory state. It will remove roots, and viruses, un-brick, and fix your device if it’s stuck on the boot logo, or lags, and Restart.
Download Cubot X30 P Flash File, Firmware from here. If your Cubot X30 P phone is corrupt or bricked. To get it back to a working condition again. Then follow the given instructions to install the Stock ROM on Cubot X30 using SP Flash Tool. This guide is also helpful to fix any software problem.
Additionally, you should consider making a backup of your all important data on your phone. Flashing will completely erase the Date on the phone. Also, you should only flash your device if you do not need Data and have major problems with your Phone.
Firmware Information:
- Device Name: Cubot X30 P
- ROM Type: Full ROM
- SoC: MediaTek
- OS: Android 13
- Password: Null
- Size:
- Region:
- Firmware Version:
- File Name:
Download the Cubot X30 P Flash File:
- CUBOT_X30P_A031_V03_20231117
- Download: Flash Tools
- Download All: USB Drivers
The Benefit Of Cubot X30 P Firmware:
- Flash Stock ROM to unbrick
- Update and downgrade Firmware
- Unroot or fix bugs on the phone
- To solve the lag or stutter
- By flashing Stock ROM, you can fix software issues.
- Revert to stock to get your warranty
- Keeps rebooting issue
- If your phone boots straight into recovery
- The phone boots straight into its bootloader
Requirements To Flash Cubot X30:
- Charge your mobile: Your phone may no less than a half charge.
- Laptop or PC: To execute this installation, you must use a PC or Laptop.
- Take Full Backup: Before going to install stock ROM you need to take a backup of all your messages, photos, and apps from your smartphone.
Most smartphones automatically make a backup in the background. But to make sure you take everything to your new device, you need a full backup.
How to Install Stock Firmware on Cubot X30 P
- First of all, Download the ‘CUBOT_X30_A031C_V09_2020711 flash file
- Then download the USB driver
- Next, switch off your smartphone and take away the battery (if it is removable).
- Now go to the sp flash tool extract folder and launch it.
- Now, click on the Scatter-loading button within the download tab.
- Choose the scatter file from the firmware extract folder.
- Now click on the Download button to start the flashing process.
- Next, connect your phone to your computer using the USB cable (without battery – if the battery is removable) and press the volume up or volume down button at the same time.
- The flashing process will start
- As soon as it’s over, you will notice the Download OK green ring in the SP Flash Tool.
- Now, close the SP Flash tool and unplug your smartphone.
That’s it. Now you’ve successfully flashed stock ROM on your Cubot X30.
