Vivo Y200 5G PD2326F Flash File Stock Rom

In this guide, we have shared the Vivo Y200 5G PD2326F Firmware Flash File, powered by a MediaTek Dimensity 810 processor. To install the firmware flash file, you need software called the SP Flash tool which can be helpful to flash the stock ROM on your device.

This process is helpful if you have bricked your device, lag, Pin Pattern Lock, or shuttering performance, fix Bluetooth and WiFi issues, and unroot or bypass the FRP lock and Black and white Display after flashing the wrong File.

About Vivo y2005g:

Vivo Y200 5G was launched in India on October 23. Snapdragon 4 Gen 1 SoC powers it and has 8GB of RAM with the extended RAM feature. the Vivo Y200 supports an AMOLED display with a 120Hz refresh rate. The Vivo Y200 is packed with a 4,800mAh battery with 44W fast charging supports.

Download Vivo Y200 5G PD2326F Flash File:


  • Supported device: Vivo Y200 5G PD2326F
  • Make sure to charge your device more than 50%
  • You need a PC or Laptop with a USB cable.
  • Take a complete backup using any method
  • Download All USB Drivers and Flash Tools.

Advantages of Stock ROM:

  • you can unbrick your dead device with Stock Firmware.
  • You can repair the IMEI on your device
  • Remove any malware or Adware from Vivo Y200 5G
  • You can fix the boot loop issue on Vivo PD2326F
  • Fix Unfortunately, the app has stopped errors on the Vivo Y200 5G
  • Fix Network related issue
  • You can Root or unroot your device
  • Bypass or Remove FRP on your device
  • Restore Vivo y200 5G back to Factory State

How to Install Firmware on Vivo y200 5g Pd2326f:

  • Download all the required files and flash tools on your PC.
  • Open the Flash tool .exe file
  • Tap on the Download option and load both the download agent and the scatter text file in the scatter-loading section.
  • Once you load the file, click the Download button
  • Now hold the Volume Down and Volume Up keys together, and Connect your Phone to your PC/Laptop using a USB Cable (Keep the Volume Down and Volume Up button until your computer detects the phone.)
  • When the phone connects, your device will start upgrading the stock firmware.
  • Wait for a few minutes, If you see a green button on your flash tool, it means the upgrading process has been completed.


We are on and will not be liable for any damage/error that may occur to your phone while following this tutorial. Proceed at your own risk.


Please enter your comment!
Please enter your name here